Official Updates

How To Install Motorola One Power Android 9.0 Pie Update

Finally, Motorola One Power has started getting the Android 9.0 Pie official update. If you are waiting for Motorola One Power Android 9.0 Pie update, then the wait is over. Now the update is live and you can download and install it. Here we share a detailed guide on how to install Motorola One Power Android 9.0 Pie Update. The Motorola One Power is one of the first Moto devices to receive the 9.0 Pie OTA update. This Android 9.0 Pie official update brings important improvements and comes with build number PPT29.74-25 along with the latest November 2018 Security Patch. The new firmware update is rolling out via OTA (Over-the-Air), in phase wise manner.

If you are excited to install Motorola One Power Android 9.0 Pie but the update is not available in your region yet, then you can download the full firmware and install manually by following given below detailed guide. The Android 9.0 Pie OTA update comes with tons of new features and customization like Add LTE+LTE (Dual Volte) feature, Camera improvements, Notch Support, Improved Adaptive Brightness, Android Dashboard which Google calls Digital Wellbeing, Upgrade system from Android 8.0 Oreo to Android 9.0 Pie and so on. Also, the update brings update brings a longer and improved battery life gets a new user interface with redesigned Quick Settings and much more.

Not necessary but it is better to take the full backup of all your important data before proceeding. If you want to install Motorola One Power Android 9.0 Pie Update official firmware then go ahead and follow the given steps.

Motorola-One-Power-Android-9.0-Pie-Update-1024x579 How To Install Motorola One Power Android 9.0 Pie Update OTA Update One Power Android 9.0 Pie Update One Power Official Firmware Motorola One Power Motorola Android 9.0 Pie

Note:

The Android 9.0 Pie OTA and instructions given in this guide are only working with the above-mentioned variants of Motorola One Power. Do not try to install this firmware on any other device or incorrect variant. Check the model number of your device first.

Warning:

Androidsoul.net will not responsible for any kind of damage or mishap occurred to the Motorola One Power during or after the installation of Android 9.0 Pie official OTA build. Proceed at your own risk.

Pre-Requirements:

  • Create a full Backup on your phone before Installing any new firmware.
  • Enable USB Debugging on your Motorola One Power.
  • Install USB Drivers for Android Devices on your PC.
  • The battery level of your phone must be at least about 70% – 80% to avoid unexpected shutdowns while installation.

Required Files:

Steps to Install Motorola One Power Android 9.0 Pie Update:

1: – First, connect your Motorola One Power to the computer via its USB data cable.

2: – Next, transfer the firmware file that you have already downloaded from the above link. To the root folder of internal storage on the phone.

3: – After transferring the Android 9.0 Pie OTA file. disconnect the device from the PC and power it OFF in order to boot it into Recovery Mode. Power ON the phone while pressing and holding the Volume and Power keys at the same time until you see something on the screen, this is bootloader mode.

4: – Using the Volume Down button, scroll down to Recovery. choose it using Volume Up and reboot the Motorola One Power into recovery mode

5: – In recovery mode, select install update from sd card.

6: – Navigate to the location where you have placed the OTA firmware file on the SD Card of your phone. Select it using the Power button and confirm installation to proceed.

 7: – Go back to the main recovery menu once the installation completes and select reboot system now.

Done! You’ve successfully installed Motorola One Power Android 9.0 Pie Update.

About the author

Bhatti Junaid

Leave a Comment